Sunday, February 25, 2018

Canon Pixma TS3122 Wireless Printer Setup, Software & Driver

Canon Pixma TS3122 Wireless Printer Setup, Software & Driver

Canon Pixma TS3122 Wireless Printer Setup, Software & Driver
Canon Pixma TS3122 Wireless Printer 

Canon Pixma TS3122 Wireless Printer Setup, Software & Driver - The Canon Pixma TS3122 Wireless Inkjet All-in-One ($ 79.99) is one of very few inkjet printers with the distinction of a below-$ 80 sale price (and also its street price of $49.99 means that you can in fact buy it for less than $50, making it all the more one-of-a-kind). Not only is this of the least-expensive consumer-grade photo all-in one (AIO) printers we've evaluated recently, it's additionally one of the tiniest, slowest, as well as fastest on features.

A Minimalist in All Ways
Gauging 5.8 by 12.5 by 17.2 inches (HWD) with its trays shut as well as weighing 8.5 extra pounds, few AIOs are as tiny as the TS3122, other than the HP DeskJet 3755 (5.6 by 15.9 by 7 inches and 5.1 pounds), though the Epson Expression Home XP-440 Small-in-One comes really enclose size, and also evaluates just half a pound a lot more. The next TS-series version up, the Canon TS5020, measures about four inches broader and is practically two times as hefty. Additionally, the Canon TS5020 utilizes 5 inks, whereas Canon Pixma TS3122 uses only four, making the previous a much better selection for printing pictures.

It's essential to note that of these entry-level printers raise significantly comprehensive as well as elevation with their input as well as outcome trays released. The TS3122, as an example, boosts from 12.5 inches long to 21.8 inches, as well as HP's 3755 expands up by about 5 inches and extends by over 10 inches. Nevertheless, most fit conveniently on the typical desktop computer, as well as the TS3122 (and also its rivals) are developed to close up quickly, taking up as little room as feasible while not in service.

An additional outright giveaway that the TS3122 is a low-volume printer is that, as opposed to using a different print cartridge for every of its 4 inks (cyan, magenta, yellow, as well as black, or CMYK), it uses only two. One tank holds the black ink, and also the other holds the other 3 shades. Not only do these types of ink cartridges hold less ink compared to different cartridges do, but with the three-ink color ink storage tank, the cartridge should be replaced when any one of the three reservoirs clears-- despite what does it cost? ink is left in the various other two storage tanks. To puts it simply, the three-ink storage tanks are typically wasteful.

For some time there, it resembled printer producers were avoiding this sort of two-cartridge ink system, however it seems returning. HP now has numerous, consisting of the HP DeskJet 3755 and also the firm's current Envy Photo 7855 All-in-One, a significantly more expensive as well as full-featured TS3122 competitor. '

Along with the entry-level ink system, the TS3122's marginal paper taking care of capacity of just one 60-sheet paper tray, compared to the Canon TS5020's and TS9120's two 100-sheet trays, positions it firmly in the entry-level column. The HP 3755, on the other hand, additionally holds only 60 sheets of paper, and the Epson XP-440's solitary tray stands up to 100 sheets.

The TS3122's paper tray can additionally be configured to stand up to 20 sheets of 4-by-6-inch premium image paper, and also up to 10 sheets of 5-by-7-inch picture paper, which has to do with the like the other designs pointed out right here. However, the TS3122 does not sustain photo paper larger than 5 by 7 inches; you can't print indeterminate 8-by-10-inch images, for example, much less bigger sizes.

Like the HP 3755, the TS3122 cannot print two-sided web pages immediately (auto-duplexing) either. You have to transform your papers over manually to print on the other side. The Epson XP-440 can print two-sided pages without manual help. Because you most likely won't be printing numerous large records, nonetheless, this shouldn't be that much of a hassle.

Rather than a tablet-like touch display with symbols that serve as shortcuts for establishing and performing numerous features and also operations profiles, the TS3122 has an entry-level control panel that consists of numerous buttons and also a 1.5-inch "segment" monochrome LCD. You utilize the panel largely for establishing and keeping track of features, making copies, setting paper size as well as type, and more. Most communication will certainly be with either your PC or smart phone. Printing or scanning to cloud sites, for instance, are set up and carried out from your smart device or tablet with one of Canon's mobile apps.

Links and also Software
Because the TS3122 is at the bottom of the Canon Pixma-TS-series pecking order, it has the fewest connectivity options. Standard connectivity consists of Wi-Fi and also connecting to a solitary PC by means of USB. You additionally get Wireless PictBridge for printing from details Canon cams, consisting of specific electronic video cameras. All 4 of the other TS-series designs additionally feature Bluetooth, and the Canon TS9120 sustains Ethernet. Mobile connectivity features, though sparser compared to on its higher-end brother or sisters, consist of Canon Print app, Wireless Scanning, and Pixma Cloud Link for, well, attaching to different prominent cloud sites, along with Canon's very own cloud file database.


Given that TS-series AIOs are created mainly for collaborating with images, the TS3122's software bundle is composed mainly of energies for scanning, improving, dealing with, handling, and also printing pictures. In addition to the drivers for the machine itself, you likewise obtain Canon's Scan Utility, a reasonably useful scanning user interface, provided the cost as well as scope of this AIO; Master Setup, for setting up and also checking the printer; My Printer Network Tool, for taking care of the TS3122 on your wireless network; My Image Garden, a collection of enhancement and also improvement filters, such as red-eye elimination as well as photo chopping; and also a few others. And lastly, there's Quick Menu, which stays in the lower-right edge of your display as well as includes a set of faster ways to most of the software and hardware features.


Wireless/Wifi/WPS Connection set-up Guide For Canon PIXMA TS3122

Before we start, there are however some conditions that must be met in order to use the WPS pushbutton method:

The access point must have a physical WPS push button available, please check with your device’s user guide for details.
Ur network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points will not connect using the WPS method if the WEP (Wired Equivalent Privacy) security method is used, or if no security is enabled. For details on which security method is being used on your wire-less network, please check the wire-less connection settings on your computer.

Please follow the steps below to complete the set-up.
-->-->-->Step to 1
Make sure the wire-less router is in range of the printer & the WPS button is ready to be pressed.

-->-->-->Step to 2
Press & hold the (Wireless) button (A) on the printer until the wire-less lamp (B) flashes.

-->-->-->Step to 3
Press the (Colour) button (C).

-->-->-->Step to 4
Press the (Wireless) button until the Direct lamp (D) lights up.

-->-->-->Step to 5
Press the (Colour) button, & make sure that the ON lamp (E) & the wire-less lamp flash, then press the (WPS) button on the wire-less router within 2 minutes. The blue WiFi lamp on the printer will continue to flash while searching, & the Power & WiFi lamps will flash when connecting to the access point.

-->-->-->Step to 6
When the printer has successfully made a connection to your wire-less network, the Power & WiFi lamps will stop flashing & remain lit. The network lamp will also light up.
For exact details regarding pressing the WPS button, please refer to the access point manual.

Network settings confirmation

To confirm that your printer is successfully connected to your wire-less network, u can print out the network settings of your printer if u wish:
  • Make sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized plain paper. 
  • Press & hold the (Wi-Fi) until the WiFi lamp flashes once, & then release it. 
  • Press the (Colour)
  • Press the (Wi-Fi)
  • Press the (Colour)
The network information page will be printed.
When referring to the printout, check that “Connection” indicates “Active” & that the SSID -Service Set Identifier (the name of your wire-less network) indicates the correct name of your wire-less network.

This concludes the WPS set-up procedure.
Please now install the provided software.


If u do not have the CD(’s) that came with your product, or u're a Mac user, please Download the software on Site.

--------------------------------------------------------------------------------------------------------------------------

Standard Connection Method (For Windows & Mac users only)

If your access point does not support the WPS feature, use the following instructions to set your printer up on your wire-less network:
For Windows users, insert the CD that came with your printer & runs the setup.
If u do not have a CD drive, or you're a Mac user, then please download the software.

The downloaded file for Windows will look something like this:  win-MG/MX/TS/MP Series-XXX-n_mcd.exe

The downloaded file for Mac will look something like this: mac-MG/MX/TS/MP Series-XXX-mcd.dmg

Connection for Windows Users Only

-->-->-->Step to 1
Double-click on the downloaded .exe file to open the following screen & click (Start Setup).

-->-->-->Step to 2
The software will check to see if there are any updates to the driver & software. This may take a few minutes to complete.

-->-->-->Step to 3
Select your region & country, then click (Next).

-->-->-->Step to 4
If u accept the terms of the license agreement, click (Yes).

-->-->-->Step to 5
If u would like to take part in the extended survey program, click (Agree).
Otherwise, click (Do not agree).

-->-->-->Step to 6
Ensure (Deactivate the block) is checked & click (Next) .

-->-->-->Step to 7
The following screen will be displayed for a few seconds.

-->-->-->Step to 8
Select (Wireless LAN Connection) & click (Next) .

-->-->-->Step to 9
Ensure that your printer is powered on & click (Next).

-->-->-->Step to 10
The software will search for any printers already set up on your network.

-->-->-->Step to 11
If u have already connected your printer to your network, select it from the list & click (Next) to start the software installation, then proceed to.

-->-->-->Step to 16 . 
If u cannot see your printer listed, continue to -->-->-->Step to 12.

-->-->-->Step to 12
If this is the first time you're setting up your printer, it will not be displayed in the list.
Ensure (Set up the network connection according to the guide) is selected & click (Next).

-->-->-->Step to 13
The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.
Please follow the on-screen instructions carefully to prepare your printer for connection.
Only click next, when your printer corresponds with the example shown in the diagrams below -

-->-->-->Step to 14
Once u have made the necessary settings on your printer, the software will now temporarily disconnect your computer from your wire-less network & connect directly to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.

-->-->-->Step to 15
When the connection is established, click (Next) to continue with the software installation.

-->-->-->Step to 16
The printer driver software will now install & register onto your computer. This will take a few minutes to complete.

-->-->-->Step to 17
If this is the first time u're setting up your printer, it's recommended to perform the print head alignment. Click (Execute) to start the process & follow the on-screen instructions.
If u have already aligned the print head, click (Next).

-->-->-->Step to 18
Click (Execute) to perform a test print.
Once successfully printed, click (Next).

-->-->-->Step to 19
The set-up of your printer is now complete.
Click (Next) to see a list of optional software u can also install.

-->-->-->Step to 20
20 From the list select any additional software u wish to install & click (Next).

-->-->-->Step to 21
Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click on (Instructions) to find out more information on setting up your device, or click (Next) to continue.

-->-->-->Step to 22
To register your printer, click (Next) (this will open in a web browser).
Alternatively, click (Skip).

-->-->-->Step to 23
Click (Exit) to finish the installation.

Connection For Mac users only

-->-->-->Step to 1
Double-click on the downloaded .dmg file to open the following screen.

Double-click on the (Setup) icon to start the setup. If the following screen appears, click (Open).

-->-->-->Step to 2
When the following screen appears, type your Password to allow the Helper Tool to be installed, then click on (Install Helper).

-->-->-->Step to 3
Click (Start Setup) .

-->-->-->Step to 4
The software will check to see if there are any updates to the driver & software & download them as necessary.

-->-->-->Step to 5
Select your region & country, then click (Next) .

-->-->-->Step to 6
If u accept the terms of the license agreement, click (Yes).

-->-->-->Step to 7
If u would like to take part in the extended survey program, click (Agree), otherwise click (Do not agree).

-->-->-->Step to 8
The following screen will briefly appear.

-->-->-->Step to 9
If your printer has already been connected to your wire-less network, u will see the following screen. Click (Yes) to continue with the installation & jump to -->-->-->Step to 17 . If your printer has not yet been connected please continue to -->-->-->Step to 10.

-->-->-->Step to 10
If your printer has not yet been connected to your wire-less network, u will see the following screen. Select wire-less LAN Connection, then click (Next).

-->-->-->Step to 11
Ensure that your printer is powered on & click (Next).

-->-->-->Step to 12
The software will search for any printers already set up on your network.

-->-->-->Step to 13
If this is the first time u're setting up your printer, it will not be displayed on the list.
Ensure (Set up the network connection according to the guide) is selected & click (Next) .

-->-->-->Step to 14
The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.
Please follow the on-screen instructions carefully to prepare your printer for connection.
Only click next, when the printer corresponds with the example shown in the diagrams below.

-->-->-->Step to 15
The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.
When the following message is displayed, click (Allow).

-->-->-->Step to 16
When the connection has successfully completed, click (Next).

-->-->-->Step to 17
The printer driver software will now install on to your computer.
This will take a few minutes to complete.

-->-->-->Step to 18
The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.
If the following message is displayed, click (Allow).

-->-->-->Step to 19
Click (Add Printer) .

-->-->-->Step to 20
Select Canon 'MG/MX/TS/MP series' 'Bonjour Multifunction' from the list & click (Add) .

-->-->-->Step to 21
After adding your printer, the set-up screen may be hidden by the web browser. If this happens, click on the set-up icon set-up located in the dock, to display the screen again.
Once the printer has been added, click (Next) to continue.

-->-->-->Step to 22
If this is the first time u're setting up your printer, it's recommended to perform print head alignment. Click (Execute) to start the process & follow the on-screen instructions.
If u have already aligned the print head, click (Next).

-->-->-->Step to 23
Click (Start) to perform a test print & click (Print) .
Once successfully printed, click (Next).

-->-->-->Step to 24
The set-up of your printer is now complete.
Click (Next), to see a list of optional software u can also install.

-->-->-->Step to 25
From the list select any additional software u wish to install & click (Next).

-->-->-->Step to 26
Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click (Instructions) to find out more information on setting up your device, or click (Next) to continue.

-->-->-->Step to 27
To register your printer, click (Next) (this will open in a web browser). Alternatively, click (Skip).

-->-->-->Step to 28
Once the additional software has installed, click (Exit) to finish the installation.
--------------------------------------------------------------------------------------------------------------------------

Restoring your printer’s network settings back to factory default

Restoring your printer’s network settings back to factory default. If u need to reset your network settings back to factory default, for example, if u change your access point, u can do so by following these instructions:

Please note that initialization erases all network settings on the machine, so printing or scanning from a computer over the network will become impossible until the printer is re-configured with new network settings.

-->-->-->Step to 1
Press & hold the (RESUME/CANCEL) button until the ALARM lamp flashes 19 times.

-->-->-->Step to 2
Release the (RESUME/CANCEL)

The network settings have been reset back to factory default settings.
Please now refer to the WiFi set-up – (WPS or Standard Connection methods) for instructions on setting up your printer onto your WiFi network.
Source of www.canon. co.uk

How to Scan Canon Pixma  TS3122

The Windows Fax & Scan utility enables u to scan doc & pictures. Before u can scan doc & pictures u must have a scanner installed on your computer. Your scanner must be listed in the Devices section of the Devices & Printers Control Panel window.
To check to see if your scanner is properly installed open the Device Stage. Choose Start→Devices & Printers. If Windows doesn’t automatically find your scanner u can manually add it in the Devices & Printers window by clicking the Add a Device button in the toolbar & following the wizard’s commands.
-->-->-->Step to 1
Choose Start→All Programs→Windows Fax & Scan.
Windows 7 opens the Windows Fax & Scan window.

-->-->-->Step to 2
Click the Scan button in the Navigation pane then click the New Scan button on the toolbar.
The New Scan dialog box for your scanner opens.

-->-->-->Step to 3
Use the settings on the right to describe your scan.
By letting the computer know what you’re scanning its color profile & the type of file u plan to create u enable Windows Fax & Scan to create the highest quality scan.

-->-->-->Step to 4
Click the Preview button to see what your doc will look like.
Make any last minute changes.

-->-->-->Step to 5
If you’re happy with the preview click the Scan button.
Windows scans the document & presents u with an image of your document.

-->-->-->Step to
Click the Save As button & complete the necessary information.
Enter the filename the type of graphics file u want to be saved & then click the Save button.
To automatically forward the document u have just scanned as an attachment to a new fax message click the Forward as Fax button.
The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.
The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.
Source of www.dummies .com

Canon PIXMA TS3122 Driver Download  & Software Download

Canon Pixma  TS3122 series Full Driver & Software Package -
Download
Canon Pixma  TS3122 series MP Drivers (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 series Mini Master Setup (Windows 8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 series XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 Easy-PhotoPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 My Image Garden (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 Quick Menu (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 My Printer (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)
Download
Canon Pixma  TS3122 series Full Driver & Software Package - (Mac Os )
Download
Canon Pixma  TS3122 series CUPS Printer Driver - (Mac Os)
Download
Canon Pixma  TS3122 ICA Driver - (Mac Os)
Download
Setup :
Step-to-Install
Click to 'DOWNLOAD'
Plug-in-cable printer to Device
Click Open File
Double click on the downloaded file
Then Restart your Device
Good luck.

Step-to-Uninstall
Open the control panel of your device
Click uninstall
Double click on the driver file you want to uninstall
Follow the instructions uninstallation
click Finish
Good luck.

Canon Pixma TS3122 Wireless Printer Setup, Software & Driver Rating: 4.5 Posted by : Wireless Printer Setup
Posted by : Wireless Printer Setup - Wireless Printer Setup Updated at : February 25, 2018